SJP3520 30% Post-Consumer Polypropylene

Product Data Sheet

Physical Properties

ASTM Method

Properties (Mean)

Properties (Range)

Specific Gravity: W1 / (W1 – W2)

D792

0.925 g / cm3

0.90 – 0.935 g / cm3

Melt Flow: @230° C /2.16kg

D1238

35 g / 10 min

34 – 37 g / 10 min

Ash Content: @800° C 15 min

D5630

2%

1% – 4%

mechanical Properties

ASTM Method Properties (Mean) Properties (Range)
Tensile Strength: @ Yield D638 3,000 psi 2,500 – 3,400 psi
Elongation: @ Yield D638 10% 8% – 14%
Flexural Modulus: 1% Secant D790 140,000 psi 120,000 – 160,000 psi
Izod Impact Strength: @ Break D256 2.0 ft-lbs / in 1.8 – 2.5 ft-lbs / in

Property Notes

Values are for guideline purposes only – actual stated values are based upon ASTM testing standards.  Performance may vary depending upon injection-molding conditions or product design.  Significant loss of physical properties may occur if material is run above degradation temperature.

St. Joseph Plastics makes no warranties or specific use recommendations. This data sheet does not guarantee product performance, license to operate, suitability, conditions for safe handling, or specific fitness of product. For specific safety recommendations consult the SDS information. 

Product standard color is black. Other colors available upon request.

Suggested Molding Parameters

Melt Temperature:

Feed Zone:

350° F / 135° C

Barrel:

375° – 450° F / 191 – 232° C

Mold:

100° – 150° F / 38 – 66° C

Signature Resins

Signature Resins Melt Izod Color
1010NB 10 8.0 + Black
202 20 2.0 Black
2060 18 4.0 Black
2515 Green 25 1.5 Green
3015 30 1.5 Black
3020 30 2.0 Black
3520 35 2.0 Black
G-0P4HLM2DNB UA-183091144-1